System 30 - Pinstop Track, 1200 mm, Screw size M6, Standard Pinstop Spacing c-c 50 mm

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

System 30 - Pinstop Track, 1200 mm, Screw size M6, Standard Pinstop Spacing c-c 50 mm30 mm x 1200 mm long pin stop track with holes for M6 fasteners. 100 mm hole spacing for fasteners and c c 50 mm between trim positions. To be combined with System 30 pinstop car 443 126 01. Ideal as jib sheet tracks on medium sized yachts. System: 30 Profile: Pinstop Length: 1200 mm W: 30 mm H: 17 mm Fasteners: M6 Comment: Hole spacing c c (mm) = 100, Pin stop c c = 50

this organizer is equipped with polymer sheaves with ball bearings to handle side loads and reduce friction for smooth sail trimming

The tapered pad allows for adjustments to the cleat angle and can be double-stacked to achieve greater angles or serve as a riser pad

the USL must be drastically reduced as opposed to when used for gennaker

with stainless lining

The pole is intended for dip gybing with Seldén's bayonet car / slider

The mast swivel can be fitted “up-side-down” depending on desired orientation of the Cam cleat

When the ratchet is activated it locks the sheave in one direction and allows the sailor to relax a bit without cleating the line

The toggle accepts PBB60

Length min: 518 mm

The 60 mm Plain Bearing Block - Double is ideal for heavy and static loads on larger boats

B-MIN: 70 mm

ØPin: 10 mm