Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

SA-12M - Passive 12" Floor / Stage Monitor Wedge StyleThe SA 12M passive floor monitor delivers focused vocal and instrument monitoring for bands, solo performers, and DJs who need reliable stage sound. This wedge style monitor cuts through stage noise to help performers hear themselves clearly during live performances. Built around a 12 inch woofer with 2 inch Kapton voice coil and 4x10 piezo tweeter, the SA 12M handles 150 watts RMS (300 watts peak) while maintaining clear definition across its 45Hz

The bi-amp/full-range switch lets you run it from a single stereo amplifier channel in full-range mode

The 98 dB sensitivity means they'll produce good volume without requiring massive amplifier power

Spec Value Power (RMS) 350 watts per cabinet Power (Peak) 700 watts per cabinet Woofer Four 8-inch drivers with 20 oz magnets HF Driver 1-inch super tweeter Frequency Response 60Hz - 20kHz Sensitivity 97dB Impedance 8 ohms per cabinet Crossover 3

and small venues that need professional mixing and amplification in one compact unit

Verify the original driver's impedance matches the 8-ohm rating and check that your crossover network is compatible with the 35Hz-3kHz frequency response

Spec Value Driver Size 8 inches Power (RMS) 100 watts Power (Peak) 200 watts Frequency Response 55-5000 Hz Sensitivity 94 dB Impedance 8 ohms Voice Coil 2 inches Magnet 35 ounces Chassis Pressed steel frame Cone Material Paper Weight 8 lbs each Quantity Set of 2 drivers Warranty 1 year Recommended For DIY cabinets

The coaxial design eliminates phase issues between drivers since both frequencies originate from the same point

Standard speaker cables connect to your amplifier or powered mixer - no special connectors required

or having a spare cable

making them suitable for touring and mobile applications where parts are accessed frequently

audio interfaces

For high-powered amplifiers over 200 watts or very long cable runs

Exchange/Return Notes